Well, the board is either fixed, or it's going to run terribly. Cross your fingers and hope for the best. I'm at my technical limit right now.
New source for Iron...picts post #7
New source for Iron...picts post #7
Hi Fellas,
I just found out about these guys. I ordered the $250 setup. Ugly but decosmosed. I'm rolling the dice on one. PAX
SKS $250 http://pacifictoolandgauge.com/cfs-r...h-bayonet.html
SKS $379 http://pacifictoolandgauge.com/cfs-r...h-bayonet.html
I just found out about these guys. I ordered the $250 setup. Ugly but decosmosed. I'm rolling the dice on one. PAX
SKS $250 http://pacifictoolandgauge.com/cfs-r...h-bayonet.html
SKS $379 http://pacifictoolandgauge.com/cfs-r...h-bayonet.html
Last edited by echo1 on Sun Nov 05, 2017 7:15 pm, edited 2 times in total.
Re: New source for Iron
echo1 wrote: ↑Mon Sep 04, 2017 5:57 pmHi Fellas,
I just found out about these guys. I ordered the $250 setup. Ugly but decosmosed. I'm rolling the dice on one. PAX
SKS $250 http://pacifictoolandgauge.com/cfs-r...h-bayonet.html
SKS $379 http://pacifictoolandgauge.com/cfs-r...h-bayonet.html
Links are showing page no longer available. Maybe this one will work better.
http://pacifictoolandgauge.com/search?c ... it_search=
Mike
TSgt, USAF Retired
Jan 86 - Sept 08
Aircrew Life Support
"Your Life Is Our Business"
(122X0, 1T1X1, 1P0X1)
NRA Life Member
TSgt, USAF Retired
Jan 86 - Sept 08
Aircrew Life Support
"Your Life Is Our Business"
(122X0, 1T1X1, 1P0X1)
NRA Life Member
Re: New source for Iron
Apparently I got the last one for $250. It's showing 8 of the others at $379. PAX
Re: New source for Iron
It's shipped and they have another listing for some at $350. PAX
Re: New source for Iron
Pacific only had one more at $250 a parts build, non matching and not camoed. Mine's waiting at the FFL to DROS along with a Mosin M44. PAX
Re: New source for Iron
Just got back from my FFL to give my latest acquisitions the once over. To say the least I'm happy. The slingless, mismatched, refurbed M44, looks like it went door to door, rousting Nazis in Stalingrad. TBM 1's Pacific SKS lead, was in fact a very nice deal for the money. The listed picture was accurate. Ugly leaf-rattle-can-camo paint job, made uglier with add on rubber recoil pad and backwards installed spring attached sling......but
ALL MATCHING NUMBERS, even the wood, with cleaning rod & kit in the stock. Late pinned barrel /26\ with a good crown, shinny bore, decent bluing, tiny CAI import stamp under spiker. Didn't check the sear engagement, but otherwise it looks like an easy save/resto project, at a fair price. I'm thinking the paint strip efforts will equal decosmofizing. One more SKS in the rack, thanks T, PAX
ALL MATCHING NUMBERS, even the wood, with cleaning rod & kit in the stock. Late pinned barrel /26\ with a good crown, shinny bore, decent bluing, tiny CAI import stamp under spiker. Didn't check the sear engagement, but otherwise it looks like an easy save/resto project, at a fair price. I'm thinking the paint strip efforts will equal decosmofizing. One more SKS in the rack, thanks T, PAX
Re: New source for Iron...update post #6
Hi Fellas,
Finally got around to picking up my $250 SKS from my FFL. This is the mongrel dog as received. After giving it a close look over I found some features I've not seen before. First was the sling. I haven't encountered spring retainers with that type of adjustment hasp, usually those have a keeper with a slide. Pinned barrel, milled TG, grey bolt carrier.

I was mistaken on the arsenal. It's /416\# 21006149. All matching, bolt too, but the stock couldn't be easily salvaged, so I turned the Khyber Pass Fab Team loose on it. Looks like someone tried to "battle" age it, with kill hash marks and scratches, couple drill holes. Does not reek of "been there done that" NOT. Bubba screwed up a good piece of wood, but it's only a Chinese...right.

After the moral equivalent of decosmolizing (paint stripping), the metal bits revealed quite a surprise.

Half a day of elbow grease between chores, and look what was under it all. Doesn't look to have been fired much, at all.

I had a nice pinned barrel side sling mount stock on it at first, but it was numbered.

Replaced with a blank pinned stock instead.

Didn't strip the bayo handle or cleaning rod yet, but it's an operationally functioning battle rifle. For now I'm done. Khyber Pass Fabrication Shop saves another. Thanks TBM 1 & Glocked@45, PAX
Finally got around to picking up my $250 SKS from my FFL. This is the mongrel dog as received. After giving it a close look over I found some features I've not seen before. First was the sling. I haven't encountered spring retainers with that type of adjustment hasp, usually those have a keeper with a slide. Pinned barrel, milled TG, grey bolt carrier.

I was mistaken on the arsenal. It's /416\# 21006149. All matching, bolt too, but the stock couldn't be easily salvaged, so I turned the Khyber Pass Fab Team loose on it. Looks like someone tried to "battle" age it, with kill hash marks and scratches, couple drill holes. Does not reek of "been there done that" NOT. Bubba screwed up a good piece of wood, but it's only a Chinese...right.

After the moral equivalent of decosmolizing (paint stripping), the metal bits revealed quite a surprise.

Half a day of elbow grease between chores, and look what was under it all. Doesn't look to have been fired much, at all.

I had a nice pinned barrel side sling mount stock on it at first, but it was numbered.

Replaced with a blank pinned stock instead.

Didn't strip the bayo handle or cleaning rod yet, but it's an operationally functioning battle rifle. For now I'm done. Khyber Pass Fabrication Shop saves another. Thanks TBM 1 & Glocked@45, PAX
Re: New source for Iron...picts post #7
good job!
-
- Junior Member
- Posts: 48
- Joined: Sat Jun 03, 2017 8:18 am
- Age: 33
- Location: Cornfields, Ohhhhhio
Re: New source for Iron...picts post #7
Nice work!!
Re: New source for Iron...picts post #7
Thanks guys. It was a bit of a gamble but worth the efforts. I was envisioning less. PAX
Re: New source for Iron...picts post #7
Was definitely not expecting such a good looking rifle under that turd!
-
- Registered User
- Posts: 21
- Joined: Tue Jan 16, 2018 6:57 am
- Age: 26
- Location: Ohio USA
Re: New source for Iron...picts post #7
Talk about polishing the crap off a turd!
Nice clean up!
Nice clean up!
Re: New source for Iron...picts post #7
Looks good!
Who is online
Users browsing this forum: No registered users and 1 guest