Well, the board is either fixed, or it's going to run terribly. Cross your fingers and hope for the best. I'm at my technical limit right now.

Who here uses a wet tumbler?

Post Reply
Message
Author
BCR#1
Junior Member
Junior Member
Posts: 29
Joined: Wed Dec 05, 2018 4:05 am
Age: 65
Location: Chattanooga, TN
United States of America

Who here uses a wet tumbler?

#1 Post by BCR#1 » Sat Aug 10, 2019 1:58 pm

I switched to a wet tumbler w/ the SS pins as the dry media tumblers couldn't clean to my satisfaction any longer. I now have "new" looking brass and no more airborne dust to deal with.

Bill

luigi
Member
Member
Posts: 127
Joined: Tue Nov 28, 2017 5:20 pm
Age: 69
Location: usa arkansas
United States of America

Re: Who here uses a wet tumbler?

#2 Post by luigi » Sat Aug 10, 2019 5:15 pm

I have had one since last Christmas. I got a universal de-capper to first remove the primers so the pins will clean the primer pockets. I still use my corncob dry to remove the "pam" lube after I size my cases. Maybe a little more work but IMHO it does a better job cleaning the brass.!

User avatar
Rapidrob
Global Moderator
Global Moderator
Posts: 871
Joined: Sat Jun 03, 2017 9:10 am
Age: 68
Location: New Mexico
United States of America

Re: Who here uses a wet tumbler?

#3 Post by Rapidrob » Sat Aug 10, 2019 10:17 pm

I have been wet tumbling for over 30 years now. I will never go back.
Tin Can Sailor
'Nam Vet
NRA Endowment Member
President New Mexico Military Surplus Rifle Pistol Shooters

m47dragon
Member
Member
Posts: 50
Joined: Fri Jun 02, 2017 8:35 pm
Age: 45
Location: Alanson, Michigan
United States of America

Re: Who here uses a wet tumbler?

#4 Post by m47dragon » Sun Aug 11, 2019 10:54 am

I wet tumble the bulk brass that I pick up from our local range. Rinse,dry and tumble with walnut shell and a bit of Flitz or Brasso.

BCR#1
Junior Member
Junior Member
Posts: 29
Joined: Wed Dec 05, 2018 4:05 am
Age: 65
Location: Chattanooga, TN
United States of America

Re: Who here uses a wet tumbler?

#5 Post by BCR#1 » Fri Aug 16, 2019 8:28 am

luigi wrote:
Sat Aug 10, 2019 5:15 pm
I have had one since last Christmas. I got a universal de-capper to first remove the primers so the pins will clean the primer pockets. I still use my corncob dry to remove the "pam" lube after I size my cases. Maybe a little more work but IMHO it does a better job cleaning the brass.!
I do the same. A Lee de-capping die for the primers and my dry tumbler to remove the lube from rifle cases.

Bill

User avatar
AMraider
Member
Member
Posts: 91
Joined: Mon Jun 05, 2017 1:41 pm
Age: 55
Location: USA, Iowa
United States of America

Re: Who here uses a wet tumbler?

#6 Post by AMraider » Sat Sep 07, 2019 11:31 pm

For several years I just tossed my brass in old socks and ran it through the clothes washer. Then a sock ripped open sending brass all over the washer and some were stuck behind the door seal. I decided it was time to do something different. My sonic cleaner did ok but never made the brass really shine. Not wanting to invest in an expensive tumbler for a trial I bought this at a Harbor freight with a 25% off coupon then ordered the pins and cleaner online. $75 total. This was just 20 min of tumbling for this batch of 327 Fed Mag.

jeff
Attachments
Tum2.jpg
Tum1.jpg
Tum3.jpg

BCR#1
Junior Member
Junior Member
Posts: 29
Joined: Wed Dec 05, 2018 4:05 am
Age: 65
Location: Chattanooga, TN
United States of America

Re: Who here uses a wet tumbler?

#7 Post by BCR#1 » Thu Sep 12, 2019 10:33 am

I run my Frankford Arsenal model for the full three hour cycle and it even cleans the primer pockets to like new condition. The drum is large enough that I can clean 4-500 pcs of .45ACP at a time.

Bill

User avatar
AMraider
Member
Member
Posts: 91
Joined: Mon Jun 05, 2017 1:41 pm
Age: 55
Location: USA, Iowa
United States of America

Re: Who here uses a wet tumbler?

#8 Post by AMraider » Thu Sep 12, 2019 3:30 pm

I am going to order a Universal de-capper from Grafs and start doing what you do. I am not a high volume reloader so this should work for the time being. I wish that I had started this a few years ago.

Jeff

Post Reply

Return to “Reloading”

Who is online

Users browsing this forum: No registered users and 6 guests