Boxer vs. Berdan Primers – What’s the Difference?
https://www.ammunitiontogo.com/lodge/bo ... n-primers/
____________________________________________________________________________________________Boxer-Primed Ammo: Boxer Primers Explained
Looking for Boxer-primed ammo? See what we have in-stock: Boxer-Primed Ammo Search »
Boxer Primer AmmoBoxer primer is the most popular primer style in the United States, due to its ease of reloading – also making it the primary choice among military and civilian ammo manufactuers. Created by Edward Boxer, this popular ammo was patented in England in 1866 and in the U.S. in 1869.
What Is Boxer-Primed Ammo?
The weapon's firing pin strikes the base of the primer cup, which causes the primer mixture to be crushed against the anvil. This creates a flash that goes through the flash hole, igniting the powder in the cartridge.
Today, these primers are created by the millions in various factories around the world. They are typically used with brass casings, and are found in the sizes below.
Boxer Primer Sizes
There are four sizes of Boxer primers available today for reloading:
0.175” or 4.45mm: Small diameter pistol or small rifle primer such as .38 Special and .223 Remington.
0.209” or 5.31mm: Shotgun shell and muzzleloader primer such as 12 gauge and 20 gauge shotgun ammo.
0.210” or 5.33mm: Large rifle or large pistol primer such as .308 and .44 Magnum.
0.315” or 8mm: These are exclusive to the .50 BMG and variations.
The primer size is determined by the cartridge’s primer pocket, which is the opening at the bottom of the cartridge case. A difference you can see when comparing pistol and rifle primers is how thick the primer’s cases are. Pistol primer cases won’t be subjected to as much pressure as their rifle counterparts – which means they will be slightly thinner and easier to ignite.
Boxer cases don’t accept Berdan primers and vice versa, which is due to the anvil being a permanent part of the Berdan-primed case. With that being said, reloading enthusiasts can get them to work with each other through a labor intensive and rather complicated process. However, it’s much easier to simply use the proper case with the proper primer. This reloading issue is one of the main reasons shooting ranges almost exclusively use Boxer primers and brass casings. Some of the more commonly found primers are made by Remington, CCI and Winchester.
Primers give today's shooter a huge advantage over other methods of ignition. They are reliable, weather resistant and can be stored for an indefinite period of time.
I found some video of how to read primer hits. For better or worse.
Pressure On the photo on the left, the severely flattened primer on the right case indicates the load is too hot.
On the photo on the right, an extruded primer can indicate excessive pressure.
from below link
Reading Pressure Signs
http://www.massreloading.com/reading_pr ... signs.html
YOU TUBE INFO First case LIGHT LOAD, middle case NORMAL, right case Crater=OVER PRESSURE
pic from below source This is worth watching.
LOOKING AT YOUR PRIMERS ON SPENT ROUNDS FOR SIGNS OF OVER PRESSURE - HD
Excessive pressure indicators
pics from below source
Reloading 101: Inspect Your Spent Primers!
Flat primers, a little to hot (30-06 loaded with IMR 4895)
0:04 / 2:07
Signs of Overpressure, 223 brass
Dents in primer 2 lower pictures
from below link
Gun&Ammo Staff - November 29, 2017
The Truth About Primer Misfires
https://www.gunsandammo.com/editorial/t ... res/247980
Anyone got some better info & pictures please post. Thanks