Page 1 of 1

WZ-1970 Air Pistol Disassembly and reassembly help

Posted: Wed Aug 02, 2017 7:01 pm
by Kevinofborg
I need some help with disassembly on this one ( I have search the net but not found what I need to get past this one).

Has anyone removed the piston? If you want to make a phone call PM me so we can set something up. I cannot figure it out.

Thanks,
Kevin

Re: WZ-1970 Air Pistol Disassembly and reassembly help

Posted: Wed Aug 02, 2017 8:40 pm
by 72 usmc
Did you see this on how to make the seal?
http://anotherairgunblog.blogspot.com/s ... %20lucznik

a little on the piston here
https://www.gatewaytoairguns.org/GTA/in ... ic=45314.0

A review that shows the piston and some idea of how to remove but I do not have a manual nor did I ever buy a pistol
https://worap.wordpress.com/2016/11/09/ ... k-wz-1970/

source above
Removing the springs and piston is simple. With the pistol uncocked and discharged, the spring retaining cap at the base of the grip is unscrewed until it releases. There is relatively little tension on the springs, and these will project only around 1″ when the cap is removed so no special tools or precautions are required. With the cap removed, the springs, piston and sleeve can be extracted from the grip. Take care to note how the end of the trigger guard engages with the sleeve and piston assembly to ensure correct re-assembly.