Well, the board is either fixed, or it's going to run terribly. Cross your fingers and hope for the best. I'm at my technical limit right now.
Sharing: My 1911.
-
- Member
- Posts: 108
- Joined: Tue Oct 31, 2017 5:28 pm
- Age: 69
- Location: Oswego, Kansas
Re: Sharing: My 1911.
Some of my 1911 projects:
-
- Member
- Posts: 108
- Joined: Tue Oct 31, 2017 5:28 pm
- Age: 69
- Location: Oswego, Kansas
Re: Sharing: My 1911.
Some of my 1911 projects:
-
- Member
- Posts: 108
- Joined: Tue Oct 31, 2017 5:28 pm
- Age: 69
- Location: Oswego, Kansas
Re: Sharing: My 1911.
These are some of my 1911 projects. All are in .45ACP. All were a lot of fun to put together. That shiny "pimp gun" probably took the most man hours. Sanding and polishing the stainless frame and slide.
-
- Registered User
- Posts: 2
- Joined: Sun Dec 10, 2017 4:50 am
- Age: 74
- Location: williamsport PA
Re: Sharing: My 1911.
Nice looking collection.
Re: Sharing: My 1911.
I like the plain looking one. Upper right!
-
- Member
- Posts: 108
- Joined: Tue Oct 31, 2017 5:28 pm
- Age: 69
- Location: Oswego, Kansas
Re: Sharing: My 1911.
That is a SARCO kit with GI parts and a Rock Island frame.
-
- Junior Member
- Posts: 43
- Joined: Sun Jun 11, 2017 7:59 am
- Age: 49
- Location: Lords Valley, Pennsylvania USA
Re: Sharing: My 1911.
How much would it $$$ to put a 1911 together from parts?? Thinking of doing it... Just built my own AR rifle.
-
- Member
- Posts: 108
- Joined: Tue Oct 31, 2017 5:28 pm
- Age: 69
- Location: Oswego, Kansas
Re: Sharing: My 1911.
I have not done one for years now and I believe a lot of the parts from Sarco have dried up. Frames can still be had for around $200. If you can get the parts kit from Sarco somewhere north of $400 probably.http://www.e-sarcoinc.com/451911autobui ... e.aspxJust checked this. Makes it less than $400 unless you want to go with some other parts like I did. I changed the style of hammer on most of mine. Well that link is a partial dud. Scroll down to kits and their less frame kit is available for about $150. Whoops, Just noticed that is less frame and slide. You can get slides elsewhere for less than their compensated one.
Who is online
Users browsing this forum: No registered users and 1 guest