Well, the board is either fixed, or it's going to run terribly. Cross your fingers and hope for the best. I'm at my technical limit right now.

Smith & Wesson Victory Model

Post Reply
Message
Author
User avatar
Candyman
Global Moderator
Global Moderator
Posts: 119
Joined: Sun Jun 04, 2017 7:29 pm
Location: Denham Springs, LA
United States of America

Smith & Wesson Victory Model

#1 Post by Candyman » Sun Feb 25, 2018 4:26 pm

A few weeks ago I stopped off at one of the local pawn shops and saw an old revolver in the case. At first I thought it was a Spanish copy of a Smith due to the grips on the gun. It was priced $199.95 which would have been ok for a Spanish copy if it was in good shape. So I had a look at it. To my supersize it was a Smith. When I looked at the butt my hart almost skipped a beat. I found a S&W Victory Model for less then half the market value. It was missing the lanyard loop and had aftermarket grips, but other then that the gun was in very good shape.
For those that know me, I always do my best to to get a better price no matter how good the marked price is. I asked for a lower price and was told I could have it for $200 out the door, I countered with $180, they came back with $190. I said sold. Hell, I would have paid the asking price plus the 10.5% sales tax.
Image
Image
Image
Image
Image

I had a Lanyard loop that I had picked up a while back when I thought about restoring a Parker Hale reworked Victory Model I picked up.
So I gave the gun a cleaning and went to looking for an original set of grips.
Image
Image

I contacted Mr. Dennis Fisher at C D's Clips & Grips and he's shipping me an original set of Victory grips for $39.
Image

The grips were a little dirty so, I cleaned them up.
Image
Image
Image

The SN# puts it built around late 1943.
$190 for the gun.
$20 for the Lanyard loop.
$39 for the Grips.
For a total of $249 I have a Victory Model in my collection.

rob
Junior Member
Junior Member
Posts: 41
Joined: Wed Jun 14, 2017 10:38 pm
Age: 52
Location: cincinnati ohio
United States of America

Re: Smith & Wesson

#2 Post by rob » Sun Feb 25, 2018 4:37 pm

Nice score. Some day I hope I will come across one for my collection

VMASCIOP2000
Member
Member
Posts: 119
Joined: Fri Jun 09, 2017 12:41 am
Age: 63
Location: oakdale minnesota
United States of America

Re: Smith & Wesson Victory Model

#3 Post by VMASCIOP2000 » Mon Feb 26, 2018 8:59 am

Brilliant. Beautiful restore to original.
I was R.L.E.V.M. on our old forum.

sowbelle
Member
Member
Posts: 126
Joined: Wed Jun 07, 2017 9:52 pm
Age: 52
Location: Rossville Georgia
United States of America

Re: Smith & Wesson Victory Model

#4 Post by sowbelle » Mon Feb 26, 2018 9:21 am

:clap: :clap: Great pick up Lee

User avatar
Ghoulardi
Member
Member
Posts: 204
Joined: Sun Jun 11, 2017 3:06 pm
Age: 61
Location: Cleveland, Ohio
Ukraine

Re: Smith & Wesson Victory Model

#5 Post by Ghoulardi » Mon Feb 26, 2018 11:30 am

years before S&W VICTORY MODEL were collectible and people started to buy them, thereby bringing the price up, and up as they became collectible. I found one at a gunshow for less then 100 bucks, I wanna say 75 bucks. it was lend-lease in .38 S&W, which is what I think people were passing on it, a gun that shoots obsolete ammo probably didn't appeal to people. so I got it for a song, which I though it was, others during that time thought I was dumb to pay that much for it. but, I didn't care what they thought. it was stamped U.S PROPERTY with the inspectors initials (GHD) and a ordnance bomb, and it would just add to my military side arms collections



the thing that had me scratch my head , there was a small ground out divit on the left side of the frame . which I couldn't figure what that was. until a few years later, I went on one of the gun boards and someone showed a Austrian police issue VICTORY MODEL that has the Austrian eagle and stamped Austrian police where the divit was one mine. so that cleared up that mystery. it started life anew as a a post-war issued side arm to the Austrian police force.

Image
Last edited by Ghoulardi on Mon Feb 26, 2018 11:53 am, edited 5 times in total.
COOL IT WITH THE BOOM-BOOMS!! OVA-DAY!!

User avatar
Ghoulardi
Member
Member
Posts: 204
Joined: Sun Jun 11, 2017 3:06 pm
Age: 61
Location: Cleveland, Ohio
Ukraine

Re: Smith & Wesson Victory Model

#6 Post by Ghoulardi » Mon Feb 26, 2018 11:35 am

this a very clean and nice revolver. no pits anywhere on the surface of it or the bore. except that ground out area, looks as it was made a few months ago. cylinder locks up nice and tight

don't exactly know when it was made, but a good guess is from info on gleaned from this tid bit

From approximately 1942 to about May 1943 the acceptance mark of Ordnance officer Guy H. Drewry is found on the butt. From approximately V300000 to end of production G.H.D is found on the left top strap;

since mine is is 497xxx, 1944

Image

Image


Image
Last edited by Ghoulardi on Mon Feb 26, 2018 3:06 pm, edited 1 time in total.
COOL IT WITH THE BOOM-BOOMS!! OVA-DAY!!

M67
Member
Member
Posts: 168
Joined: Mon Jun 05, 2017 2:52 pm
Age: 50
Location: Slovenia, Europe
Slovenia

Re: Smith & Wesson Victory Model

#7 Post by M67 » Mon Feb 26, 2018 2:42 pm

Back in all its glory! Magnificent work.
I'm always happy to see an excellent restoration work.
»You're a disgrace. I'd like to know how you got to be a Captain, anyway. »Yossarian: »You promoted me.« Colonel Cathcart: » That has got nothing to do with it.«

silverfox
Registered User
Registered User
Posts: 13
Joined: Mon Jun 05, 2017 1:45 pm
Location: Elk Grove Village, Illinois
Isle of Man

Re: Smith & Wesson Victory Model

#8 Post by silverfox » Sun Mar 04, 2018 12:03 pm

Great find. Beautiful gun

Sent from my VS987 using Tapatalk


User avatar
redeagle
Registered User
Registered User
Posts: 14
Joined: Sun Mar 04, 2018 11:34 am
Age: 51
Location: Fort Lauderdale, FL
United States of America

Re: Smith & Wesson Victory Model

#9 Post by redeagle » Sun Mar 04, 2018 5:21 pm

Great work Candyman. Nice to see you still making deals and bringing life back to these old gems.

spidereyes455
Registered User
Registered User
Posts: 3
Joined: Sat Jan 13, 2018 11:40 pm
Age: 39
Location: Brockton PA
United States of America

Re: Smith & Wesson Victory Model

#10 Post by spidereyes455 » Mon Mar 05, 2018 6:19 pm

Great score on a nice wheelgun , wish I could find deals like this once in awhile. I've wanted one of these for years but never run across them in shops or at shows , and I refuse to pay the $650 to $ 1000+ that people want on GB.

Itmocksme
Registered User
Registered User
Posts: 20
Joined: Sat Jun 17, 2017 9:38 pm
Age: 47
Location: Belton, Texas
United States of America

Re: Smith & Wesson Victory Model

#11 Post by Itmocksme » Wed Aug 01, 2018 10:36 pm

I wish I would find deals like that. Congrats!

User avatar
dmg4
Member
Member
Posts: 57
Joined: Sat Jun 10, 2017 12:48 am
Age: 63
Location: Geneva, NY
United States of America

Re: Smith & Wesson Victory Model

#12 Post by dmg4 » Sat Aug 04, 2018 6:16 am

Hmmm... I know I have one of those knocking around in one of my safes. I'll dig it out and post a pic when I get home. As I recall, it was an AA rework and was Parkerized. It looked new when I got it. Pleasant shooting little revolver. I shoot it like Luke Skywalker (use the force) because the sights are a blur to me, but I can make a mess of any target at arms-length or so. My stepfather, who spent 2 yrs on the front lines in WWII with various handguns told me this is as they were intended to be used. "If you are shooting a pistol, you'd better be good with one hand as you'll be pushing the bastards away with the other".
Frequently wrong, never in doubt.

User avatar
dmg4
Member
Member
Posts: 57
Joined: Sat Jun 10, 2017 12:48 am
Age: 63
Location: Geneva, NY
United States of America

Re: Smith & Wesson Victory Model

#13 Post by dmg4 » Tue Aug 07, 2018 5:58 pm

Here's mine:
SmithVictoryRevolver2.jpeg
SmithVictoryRevolver1.jpeg
Frequently wrong, never in doubt.

Post Reply

Return to “US Pistols”

Who is online

Users browsing this forum: No registered users and 1 guest