Well, the board is either fixed, or it's going to run terribly. Cross your fingers and hope for the best. I'm at my technical limit right now.

Czech/Turkish Mauser Vz.98 at the Range

Post Reply
Message
Author
User avatar
stomper
Registered User
Registered User
Posts: 3
Joined: Wed Jul 18, 2018 4:12 pm
Age: 30
Location: Land of Green & Gold
United States of America

Czech/Turkish Mauser Vz.98 at the Range

#1 Post by stomper » Tue Jul 24, 2018 3:35 pm

To reintroduce myself to the board I present my Czechoslovak-made Mauser Vz.98 and a comparison of the different ballistics of three types of surplus ammunition; Turkish S-Patrone, Israeli ball (I believe the flat-base bullet is ~170 grains), and Yugoslavian M49 ball. The Vz.98, like the Gew.98 it copies, has a minimum sight setting of 400 meters. First at 50 yards and then at 100 yards (only 4 rounds of Turk at 100 because I ran out before I thought to take pictures), then five rounds of Israeli and Yugoslavian at 100 with the SG.98 bayonet affixed. Note that it does not appear to affect the point-of-impact at these distances. The red dots are my points-of-aim; I place the entire paper plate on top of the "A" front sight post, level with the top of the rear sight "V". I did shoot some Israeli at 200 yards, but it was striking almost 3' high at that distance so I figured the Yugoslavian would probably go right over the target stand.

Czechoslovakia purchased Waffenfabrik Mauser Oberndorf a/N's Gew.98 production tooling and existing stock of Gew.98 parts in 1920 (Mauser was forbidden from producing military armaments so the machinery was standing idle) and established a production line at a branch of the former Skoda Artillery Works in the city of Brno. The first 10,000 rifles produced were almost exact copies of the wartime Gew.98; the only functional difference is that Czech-made stocks for the rifles did not have grasping grooves like German-made stocks. These rifles were serial'ed 0000-9999 with no letter prefix; after 10,000 were produced it was decided to change the rear sight to the Mauser-patent tangent-leaf style, and lengthen the handguard to surround the sight and the barrel up to the receiver ring.

This example is pretty interesting; though it is made of almost entirely Gew.98 parts they are not the parts the rifle was originally built with; the only matching serial numbers are on the barrel and receiver. The beech stock is probably a replacement meant to go on a Turkish M1903/30; you can see the gap at the front of the receiver for the longer receiver ring of the Turkish Model 1903. The beech handguard is also much thicker than a German-made example, and probably was shortened from a longer Turkish handguard. Though the workmanship on the outside of the stock is rough, it seems to fit in all the right places on the inside, because it is a consistent shooter at 3-4MOA.
Vz98_SG98_07-19-2018_A.jpg
Vz.98 with SG.98
Vz98_07-19-2018_C.jpg
Crest, import mark, and rear sight.
Vz98_07-19-2018_G_200yds.jpg
Vz98_07-19-2018_50yd_ammo_comparison.jpg
50 yards.
Vz98_SG98_07-19-2018_effect_on_point_of_impact_100yds.jpg
100 yards.
Forward

indy1919a4
Member
Member
Posts: 499
Joined: Sat Jun 10, 2017 12:23 pm
Age: 56
Location: Indianapolis, Indiana
United States of America

Re: Czech/Turkish Mauser Vz.98 at the Range

#2 Post by indy1919a4 » Tue Jul 24, 2018 6:05 pm

That is a great looking rifle.. Nice little Harmonics test putting the Bayonet on it..

shoot4fun
Member
Member
Posts: 64
Joined: Sat Jun 03, 2017 8:18 am
Age: 33
Location: Cornfields, Ohhhhhio
United States of America

Re: Czech/Turkish Mauser Vz.98 at the Range

#3 Post by shoot4fun » Wed Jul 25, 2018 7:43 am

I know it was a different time, but I'm always surprised when I read or see these old rifles with sights starting at 300+ yards/meters

Post Reply

Return to “Turkish Rifles”

Who is online

Users browsing this forum: No registered users and 1 guest