My first SMLE, 1945 Lithgow

Post Reply
onefouralpha
Junior Member
Junior Member
Posts: 27
Joined: Thu Jul 13, 2017 12:08 pm
Age: 27
Location: Rapid City, SD

My first SMLE, 1945 Lithgow

Post by onefouralpha »

I picked this up a couple weeks back at the local fun store for $390. JJCo import 1945 Lithgow. Metal is all matching but the wood is SLAZ 42 and SLAZ43 marked. Everything is either MA or OA marked, so I believe it's all Aussie. From what I could find, the JJCo stuff is rebuilt with new-old-stock parts bought from the Lithgow arsenal. Anyway, it's all newish. Bright, sharp rifling, no digs or dents in the wood, sharp show line corners on the stock. Extraction is almost difficult because the extractor spring pushes the cases to the left so hard against the receiver. So maybe not a purist collector piece, but certainly the cleanest SMLE I've ever seen.
21754366_10155494197290631_1457275579_n.jpg
21754366_10155494197290631_1457275579_n.jpg (149.73 KiB) Viewed 4414 times
21684624_10155502362925631_2006476665_o.jpg
21684624_10155502362925631_2006476665_o.jpg (395.84 KiB) Viewed 4414 times
21618423_10155494197335631_149923569_o.jpg
21618423_10155494197335631_149923569_o.jpg (397.86 KiB) Viewed 4414 times
21585951_10155483539990631_1519747512_n.jpg
21585951_10155483539990631_1519747512_n.jpg (117.51 KiB) Viewed 4414 times

User avatar
vandle
Bullet Banger
Bullet Banger
Posts: 667
Joined: Sun Jun 04, 2017 6:08 pm
Age: 52
Location: Brisbane Australia

Re: My first SMLE, 1945 Lithgow

Post by vandle »

Shoot it and enjoy it.

May not be a collectors piece but they are still fun to shoot, its an Enfield after all even if its a bitzer
Life is tough, tougher if your stupid

"The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it." Albert Einstein

DaleH
Member
Member
Posts: 257
Joined: Sun Jun 04, 2017 9:24 pm
Age: 57
Location: Mass, USA

Re: My first SMLE, 1945 Lithgow

Post by DaleH »

Just check to make sure there are recoil plates installed in the stock. Remember, forestock comes off before the buttstock.

Looks great! I just picked up a '44 and am still getting cosmoline out of the wood! I checked the headspace using the "spent primer" trick and it's tight.

User avatar
Tommy Atkins
Global Moderator
Global Moderator
Posts: 911
Joined: Sat Jun 03, 2017 4:47 pm
Age: 66
Location: Hagerstown, MD

Re: My first SMLE, 1945 Lithgow

Post by Tommy Atkins »

That pushing hard against the side is normal. The ejector screw is ONLY for ejecting unfired rounds.

onefouralpha
Junior Member
Junior Member
Posts: 27
Joined: Thu Jul 13, 2017 12:08 pm
Age: 27
Location: Rapid City, SD

Re: My first SMLE, 1945 Lithgow

Post by onefouralpha »

Thanks! I don't have recoil plates on this one. I've only put 10 rounds of HXP through it and doubt I'll be shooting it before next spring/summer. Is it something I can find and install myself? I spent a year building precision custom rifles and have access to a machine shop where I currently work, as well as a gamut of hand tools. Surely capable, just not familiar with these specifically.

The wood was a little dry so I gave it a couple soakings of BLO. This winter I'll be doing the typical yearly breakdown with all the milsurps to keep wood oiled and this one will get more attention then.

I'll have to check headspace, I didn't have any primers back out, but they're also crimped in. Brass looked typical for enfields. I save it to make 30-40 Krag brass but have mostly given up on reloading for the .303's because of how rough they are on the case webs.

User avatar
Smokey
Member
Member
Posts: 231
Joined: Tue Jun 06, 2017 6:46 pm
Age: 67
Location: West Virginia

Re: My first SMLE, 1945 Lithgow

Post by Smokey »

Wrap the case head with a narrow strip of masking tape before you fire it for the first time. It'll keep the case centered in the (loose) chamber so it expands evenly all around instead of bulging on one side. I also use a mild load such as UNIQUE and Hornady 100gr XTP bullets loaded to around 1600 fps. With that load I lube the case so it slides back against the bolt head while expanding to fit the chamber. Cast bullets work well for this too.
Once done, neck size the cases to keep them fireformed to the rifle's chamber.
Arguing with someone who denounces reason is like administering medicine to a corpse.

User avatar
NCshooter
Junior Member
Junior Member
Posts: 27
Joined: Mon Jun 05, 2017 3:06 pm
Age: 53
Location: Pilot Mountain

Re: My first SMLE, 1945 Lithgow

Post by NCshooter »

Good advise. My favorite load for these is a 150 grain cast bullet with 16 -18 grains of Allianz 2400. Zero recoil and light on the brass.

72 usmc
Firearm Fanatic
Firearm Fanatic
Posts: 2483
Joined: Fri Jun 02, 2017 10:28 pm
Age: 68
Location: Menomonee Falls, Wi

Re: My first SMLE, 1945 Lithgow

Post by 72 usmc »

I see a Jovino import mark. I bet an A prefix serial number. Get some recoil plates :doh:

Here is the link
http://www.surplusrifleforum.com/viewto ... f=16&t=223
Step by step process-- the trick is finding a set of original recoil plates :shhh: :snooty: :doh:
http://www.surplusrifleforum.com/viewto ... ates#p6285
To old to fight and to old to run, a Jar head will just shoot and be done with you.

Post Reply

Return to “British Empire and Commonwealth”