Well, the board is either fixed, or it's going to run terribly. Cross your fingers and hope for the best. I'm at my technical limit right now.
VZ24 Stock
-
- Junior Member
- Posts: 39
- Joined: Sat Jun 17, 2017 10:50 pm
- Age: 62
- Location: Winter Park, Florida
VZ24 Stock
Does anyone have a source for VZ24 correct stocks?
-
- Member
- Posts: 70
- Joined: Fri Jun 02, 2017 8:04 pm
- Age: 23
- Location: Kentucky
Re: VZ24 Stock
Numrich has them for around $50. Go to the Mauser section, click on cz24, and look for the stock set. Or click this link. https://www.gunpartscorp.com/products/50310
-
- Bullet Banger
- Posts: 620
- Joined: Fri Jun 02, 2017 10:28 pm
- Age: 67
- Location: Menomonee Falls, Wi
Re: VZ24 Stock
Liberty tree collectors had them a while back. I can not see their web page any more due to an old computer. If you have a new system go to Liberty and see if they still have them. https://www.libertytreecollectors.com/
There is always a few on ebay, but I am thinking with all the metal and hand guard you are looking at $75-100. The days of discarded $15 stocks from the gunsmith are long gone. Also look at the bolt cut because some are notched for a bent bolt others remain intact for a straight bolt.
There is always a few on ebay, but I am thinking with all the metal and hand guard you are looking at $75-100. The days of discarded $15 stocks from the gunsmith are long gone. Also look at the bolt cut because some are notched for a bent bolt others remain intact for a straight bolt.
To old to fight and to old to run, a Jar head will just shoot and be done with you.
Re: VZ24 Stock
I actually have a couple I can spare.
-
- Member
- Posts: 70
- Joined: Fri Jun 02, 2017 8:04 pm
- Age: 23
- Location: Kentucky
Re: VZ24 Stock
The ones I posted from numrich has are $50 plus shipping complete. I bought one from them for my vz24 sniper clone, it was missing a few parts when I got it, but I called them and they sent the missing parts out the next day free. However it is sight unseen, and It was covered in cosmoline and other gunk, but there was not major cracks or other damage on the one I got.72 usmc wrote: ↑Tue Aug 15, 2017 11:16 pmThere is always a few on ebay, but I am thinking with all the metal and hand guard you are looking at $75-100. The days of discarded $15 stocks from the gunsmith are long gone. Also look at the bolt cut because some are notched for a bent bolt others remain intact for a straight bolt.
Who is online
Users browsing this forum: No registered users and 1 guest