Well, the board is either fixed, or it's going to run terribly. Cross your fingers and hope for the best. I'm at my technical limit right now.

Search found 76 matches

by sheepdawg
Tue Feb 13, 2018 10:51 am
Forum: Swedish Rifles
Topic: 96' 1899 Carl Gustaf
Replies: 14
Views: 2490
United States of America

Re: 96' 1899 Carl Gustaf

If that's the 1899 CG It's been through a rework. That's a beech stock and an 1899 CG should be sitting in a walnut stock with an 85 degree cut on the butt. There should be some crowns behind the triggerguard. Does one have a letter under it? With those numbers on the disk it's probably been rebarre...
by sheepdawg
Mon Feb 12, 2018 12:29 pm
Forum: Swedish Rifles
Topic: 96' 1899 Carl Gustaf
Replies: 14
Views: 2490
United States of America

Re: 96' 1899 Carl Gustaf

From Crown Jewels by Dana Jones, the bible of Swedish Mausers,The minimum calibre was set to allow a gauge with the dimensions of 6.45mm. to pass the rifling lands in the bore. The depth of the rifling was set to allow a gauge of 6.75mm. to pass in the grooves of the rifling
by sheepdawg
Mon Feb 12, 2018 10:12 am
Forum: Swedish Rifles
Topic: 96' 1899 Carl Gustaf
Replies: 14
Views: 2490
United States of America

Re: 96' 1899 Carl Gustaf

You will find Swedes marked on bore diameter, the large part of the so called disk pie on the newer disks from 9 to 6, 9 (6.49)being new and 6 (6.56) being as wore out as the armorers would allow. I have no idea why 6.46, and 7 are included, I have seen an 8 stamped but this is rare. I have never se...
by sheepdawg
Tue Jan 23, 2018 12:46 pm
Forum: German Rifles
Topic: Military Surplus k98ks commonly found at gun shows
Replies: 112
Views: 21793
United States of America

Re: Military Surplus k98ks commonly found at gun shows

Very nice write up, my only disagreement is the quality of the Mitchell's reblue. The last one I saw was a total slop job, it reeked of fake. Perhaps the Mitchell's monkeys were playing grabass at the bluing tank that day.
by sheepdawg
Mon Nov 27, 2017 11:57 am
Forum: Swedish Rifles
Topic: M96 front sight height
Replies: 6
Views: 2073
United States of America

Re: M96 front sight height

Most find that at 100 yards the front sight should be between +1.5 to +2.0. provided you have the military ladder type rear sight. Get a +2.0 and a very sharp file.
by sheepdawg
Tue Nov 14, 2017 7:15 pm
Forum: Swedish Rifles
Topic: CARL GUSTAFSSTADS GEVARSFAKTORI 1919 w/Elite 101 sights.
Replies: 16
Views: 3414
United States of America

Re: CARL GUSTAFSSTADS GEVARSFAKTORI 1919 w/Elite 101 sights.

At this point I really don't care. I like the rifle. It shoots well and does not tear up my shoulder. The bore is in very good shape and the fired brass looks great. Anyway, as I have read several sage members say before, buy the rifle, not the story. You have a great day, sir. BTW, where in the he...
by sheepdawg
Tue Nov 14, 2017 1:05 pm
Forum: Swedish Rifles
Topic: CARL GUSTAFSSTADS GEVARSFAKTORI 1919 w/Elite 101 sights.
Replies: 16
Views: 3414
United States of America

Re: CARL GUSTAFSSTADS GEVARSFAKTORI 1919 w/Elite 101 sights.

The FSR m/96s were normally built on rifles with unthreaded muzzles. The Swedes threaded the muzzles in 1955. Again with Swedes anything is possible but this has been discussed before and a Swedish member at another forum stated that there were too many rifles around with standard muzzles, why use o...
by sheepdawg
Sat Nov 11, 2017 6:58 pm
Forum: Swedish Rifles
Topic: CARL GUSTAFSSTADS GEVARSFAKTORI 1919 w/Elite 101 sights.
Replies: 16
Views: 3414
United States of America

Re: CARL GUSTAFSSTADS GEVARSFAKTORI 1919 w/Elite 101 sights.

This site by a very well known Swede collector is as good a place to start learning as anywhere. A copy of Crown Jewels, The Mauser in Sweden by Dana Jones is also needed though these can get pricey. The Poyer book you see on Ebay is full of errors. Makes for good wiping though. http://dutchman.rebo...
by sheepdawg
Sat Nov 11, 2017 5:28 pm
Forum: Swedish Rifles
Topic: CARL GUSTAFSSTADS GEVARSFAKTORI 1919 w/Elite 101 sights.
Replies: 16
Views: 3414
United States of America

Re: CARL GUSTAFSSTADS GEVARSFAKTORI 1919 w/Elite 101 sights.

I'm pretty sure yours is Swedish though you never really know. I have no idea why a civilian shooter would opt for a rifle with a counter bored barrel though anything is possible. The Swedes never fought a war, used corrosive primers except in the very beginning of use and were very meticulous about...
by sheepdawg
Fri Nov 10, 2017 1:14 pm
Forum: Swedish Rifles
Topic: CARL GUSTAFSSTADS GEVARSFAKTORI 1919 w/Elite 101 sights.
Replies: 16
Views: 3414
United States of America

Re: CARL GUSTAFSSTADS GEVARSFAKTORI 1919 w/Elite 101 sights.

I've never seen a counter bored m/96 much less one set up for FSR.
by sheepdawg
Thu Oct 26, 2017 9:58 am
Forum: Swedish Rifles
Topic: Swedish Carl Gustafs M/41B sniper rifle
Replies: 14
Views: 3662
United States of America

Re: Swedish Carl Gustafs M/41B sniper rifle

Should be a crown with a letter under it normally an S on the stock behind the trigger guard, most of the time on the barrel near where it meets the receiver under the wood. Scope, mount, etc. last worked on in 1969. The best WWII bolt action sniper rifle hands down, you'll never think as highly of ...
by sheepdawg
Wed Oct 25, 2017 11:08 am
Forum: Swedish Rifles
Topic: '96 long rifle at 500 yards AND 800 Yards
Replies: 19
Views: 4547
United States of America

Re: '96 long rifle at 500 yards

M/94s true, according to Crown Jewels in 1894 Mauser Oberndorf built an addition to their factory in order to produce the Swedes. They had a huge Turkish contract to fill as well as others and were running at full capacity.
by sheepdawg
Tue Oct 24, 2017 4:05 pm
Forum: Swedish Rifles
Topic: '96 long rifle at 500 yards AND 800 Yards
Replies: 19
Views: 4547
United States of America

Re: '96 long rifle at 500 yards

Rapidbob is welcome to use whatever load melts his butter, me, I'll stay under the powder manufacturers recommendations of 46.3 gr. maximum for a 139-142 grain bullet.

I don't know what a 110 grain bullet has to do with this thread, Rapidbob says he's using 139 grain PPU
by sheepdawg
Tue Oct 24, 2017 10:26 am
Forum: Swedish Rifles
Topic: '96 long rifle at 500 yards AND 800 Yards
Replies: 19
Views: 4547
United States of America

Re: '96 long rifle at 500 yards

Although Mauser Oberndorf made a few earlier prototypes like the m/95 the first licensed production m/96s were built at the Carl Gustafs arsenal in 1898. Serial number 1 was a Carl Gustafs made rifle. Mauser Oberndorf supplemented Swedish production in 1899 and 1900 starting around serial number 20,...
by sheepdawg
Mon Oct 16, 2017 5:26 pm
Forum: Swedish Rifles
Topic: '96 long rifle at 500 yards AND 800 Yards
Replies: 19
Views: 4547
United States of America

Re: '96 long rifle at 500 yards

50 grains is the max safe load and can be found on many sites. 47 grains is my best long range load and also gives very good case life. The posted "Lawyer" loads today are way down due to the "weak" '96 actions baloney on the web. I have used this load since the 70's and so do my clubs members in t...

Go to advanced search